Full Project – WORKING CAPITAL MANAGEMENT IN MANUFACTURING INDUSTRIES

Full Project – WORKING CAPITAL MANAGEMENT IN MANUFACTURING INDUSTRIES

Click here to Get this Complete Project Chapter 1-5

CHAPTER ONE

INTRODUCTION

1.1         Background to the Study

Working capital management is managing and regulating current assets and liabilities in such a way that removes the danger of being unable to fulfill short-term commitments as they become due and avoids excessive investment in current assets, which results in idle cash (Eljelly, 2004). Working capital management entails determining the composition of net current assets and financing these assets (Samson, et al, 2012).

Additionally, working capital management may be described as the systematic accumulation of current assets minus current obligations (Lukarris & Eero, 2011). Working capital management, as described by Weston and Bringham (2015), is the investment in short-term assets. We have seen that the majority of researches approach working capital management via the lens of working capital and attempt to describe it as follows: Working Capital was described by Cheng, Frank, and Wu (2009) and Guthman & Dougall (1948) as receivables plus inventories minus payables. Working capital is a word that refers to short-term balance sheet items that are related to current assets on the asset side and current liabilities on the liability side of the balance sheet (Brealey, Meyers & Allen, 2011, p.856). Working capital should consist primarily of cash, marketable securities, receivables, and inventory, all of which are critical for the administration of the business (Ali & Ali, 2012).

Working Capital Management is important as it has direct impact on the profitability of firms (Ray, 2012). To maintain liquidity and profitability of an organization, its working capital should be managed efficiently (Nazir & Afza, 2009). This entails planning and controlling current assets and current liabilities of firms with the view to reduce the risk of inadequate and non-availability of cash (Adeniji, 2008).

Deloof (2003) posited that working capital management directly affects the liquidity and profitability of firms, the study argues that firms in a given large sample must vary in terms of size, age and Technology among others; that liquidity settings will also vary greatly depending on the risk appetite of the firm. Also, that firms will have different credit ratings that determines the way in which these firms make their purchases. According to Raheman and Nasr (2007) “Excessive level of current assets account can easily result in a firm realizing a substandard return on investment”, hence the need to manage working capital. The working capital management variables considered by this study are; account receivables, inventories turnover, account payable and cash conversion cycle (Lukkaris & Eero, 2011).

Working capital management involves planning and controlling current assets and current liabilities in a manner that eliminates the risk of inability to meet short term obligations when due and to avoid excessive investment on current assets which leads to idle cash (Eljelly, 2004) and looking at the nature of working capital and its components which are short lived, there is the need to manage working capital in order to attain profitability. “Current assets are short-lived investments that are continually being converted into other asset types” (Rao, 1989). When a firm maintain excessive current asset, it ends up tying down firm resources and that can affect profitability (Rahem & Nasir, 2011). Also, large inventory and a generous trade credit policy may lead to high sales, but that does not translate in to profitability (Rahem & Nasir, 2011). Efficient working capital management is necessary for achieving both liquidity and profitability of a company (Nazir & Afza, 2009).

A poor and inefficient working capital management leads to tying up funds in idle assets and reduces the liquidity and profitability of a company (Reddy & Kameswari, 2004). Working capital management became important and necessary during the financial crisis up to 2008 because the cost of long term debt increases and the new cost levels become difficult to attain, hence the need to manage working capital, especially when it can influence firm profitability and risk (Smith, 2018).

Firms sometimes bought goods on credit from its suppliers meant to be payable in the near future, delaying payment to suppliers allows a firm to assess the quality of products bought, and can be an inexpensive and flexible source of working capital for the firm (Perri, 2008). This in essence allows firms to utilize the available cash that ought to be used for paying for supplies to another profitable investment opportunity. However, late payment of invoices can be very costly if the firm is offered a discount for early payment (Rahem & Nasr, 2007).This decision process need to be taken by top management and is considered as payables management and as a component of working capital, it can be seen as working capital management (Cannon, 2008).

Cash conversion circle is a fundamental tool applied in the assessment of the efficiency of working capital management (Richard & Laughlin, 1980). The common measure of working capital management (WCM) is the cash conversion cycle (CCC), this is the time between making payment for the raw materials purchased and the receipts of proceeds of sales of finished goods (Deloof, 2003). The more days a company‟s money is tied up in inventory, the longer the cash conversion cycle and the longer the number of days creditors must wait for their money (Jason & Kasozi, 2017). It is usually recommended that firms should have shorter cash conversion cycle for them to be profitable and remain credit worthy (Bibi & Ajmad, 2017).

 Statement of the Problem

Adequate knowledge on Working Capital Management in the Industrial Goods Firms will help in solving the Country‟s developmental challenges such as unemployment, poverty and other related problems; as its industries will flourish as they become profitable. Many Industries earlier established have either folded or are performing very low due to their improper management of working capital which results in lack of appropriate financing and access to trade credit (Masocha & Dzamonda, 2016, Enow & Brijlal, 2014).

It has been found that there are a lot of research work on working capital management and profitability but there is none that dwell on the Manufacturing firms. This has created a gab in the body of knowledge in the Manufacturing firms. With this research, material will be made available that dwells on the Manufacturing firms. The research shall make materials available which inevitably bridge the gap that exits from the paucity of materials dwelling on Working Capital Management and Profitability in the Industrial

Goods Firms in Nigeria. With this material, there is no need for extrapolation of information that will suffice for knowledge in the Manufacturing firms. This gab in knowledge is to be filled by conducting a study on the Impact of Working Capital Management on the Profitability of Manufacturing firms. The Variables to be deployed for the study consist of Account Receivable Days, Inventory Turnover Days, Accounts Payable Days and Cash Conversion Circle as Proxies for the Independent Variable and Return on Assets as Proxy for the Dependent Variable. This work will look at the impact of managing Account receivable days (ARD), Inventory turnover days (ITO), Account payable days (APD) and cash conversion cycle (CCC) on profitability of manufacturing firms. Failure to investigate this relationship will be an issue for concern because there is no specific study that cover the Manufacturing firms as far as the Impact of Working Capital Management on Profitability is.

 

1.3         Research Questions

Based on the problem statement highlighted, the following questions were formulated:

  1. To what extent does Accounts Receivable Days (ARD) affect the Return on Asset (ROA) of Manufacturing firms?
  2. To what extent does Inventories Turnover Days (ITO) affects the Return on Asset (ROA) of Manufacturing firms?
  3. To what extent does Accounts Payable Days (APD) affects the Return on Asset (ROA) of Manufacturing firms?
  4. To what extent does Cash Conversion Circle (CCC) affect the Return on Assets (ROA) of Manufacturing firms?

 

1.4         Objectives of the Study

The main objective of the study is to examine the effect of Working Capital Management in Manufacturing industries. The specific objectives are as follows;

  1. To evaluate the impact of Accounts Receivable Days (ARD) on Return on Asset (ROA) of Manufacturing firms.
  2. To investigate the impact of Inventory Turnover Days (ITO) on Return on Asset (ROA) of Manufacturing firms.
  3. To examine the impact of number of days Accounts Payable Days (APD) on Return on Asset (ROA) of Manufacturing firms.
  4. To evaluate the impact of cash conversion cycle (CCC) on return on asset (ROA) of Manufacturing firms.

1.5         Hypotheses of the Study

In line with the objectives of the study, the following hypotheses were formulated in a null form: H01: Accounts Receivable Days (ARD) has no significant impact on the Return on Asset (ROA) of Manufacturing firms.

H02: Inventory Turnover Days (ITO) has no significant impact on the Return on Asset (ROA) of Manufacturing firms.H03: Accounts Payable Days (APD) has no significant impact on the Return on Asset (ROA) of Manufacturing firms.

H04: Cash Conversion Cycle (CCC) has no significant impact on the Return on Asset (ROA) of Manufacturing firms.

Get the Complete Project

This is a premium project material and the complete research project plus questionnaires and references can be gotten at an affordable rate of N3,000 for Nigerian clients and $8 for International clients.

Click here to Get this Complete Project Chapter 1-5

 

 

 

 

You can also check other Research Project here:

  1. Accounting Research Project
  2. Adult Education
  3. Agricultural Science
  4. Banking & Finance
  5. Biblical Theology & CRS
  6. Biblical Theology and CRS
  7. Biology Education
  8. Business Administration
  9. Computer Engineering Project
  10. Computer Science 2
  11. Criminology Research Project
  12. Early Childhood Education
  13. Economic Education
  14. Education Research Project
  15. Educational Administration and Planning Research Project
  16. English
  17. English Education
  18. Entrepreneurship
  19. Environmental Sciences Research Project
  20. Guidance and Counselling Research Project
  21. History Education
  22. Human Kinetics and Health Education
  23. Management
  24. Maritime and Transportation
  25. Marketing
  26. Marketing Research Project 2
  27. Mass Communication
  28. Mathematics Education
  29. Medical Biochemistry Project
  30. Organizational Behaviour
  31. Other Projects
  32. Political Science
  33. Psychology
  34. Public Administration
  35. Public Health Research Project
  36. More Research Project
  37. Transportation Management
  38. Nursing

Education

 

 

 

Need a Project Writer for a Different Topic

Full Project – WORKING CAPITAL MANAGEMENT IN MANUFACTURING INDUSTRIES